$user = \App\Models\User::find(1);
if (!$user) { return ["error" => "Reporter not found"]; }
$executor = app(\App\Domain\AI\ToolExecutor::class);
$actions = [
    [
        "asset" => "27",
        "priority" => "critical",
        "title" => "Jaw Crusher Motor vibration - structural looseness and unbalance (P1)",
        "plan" => [
            "Inspect and torque motor hold-down bolts and base.",
            "Repair or strengthen motor support structure.",
            "Clean motor cooling fan and crusher pulleys to remove dust buildup.",
            "Check balance after cleaning; schedule balancing if vibration persists.",
        ],
        "finding" => "Overall vibration trending 3.0 to 9.8 mm/s RMS; dominant 1x vibration indicates structural looseness and unbalance.",
    ],
    [
        "asset" => "4",
        "priority" => "high",
        "title" => "Cone Crusher A bearing fault (P2)",
        "plan" => [
            "Lubricate crusher bearings and verify lubrication condition.",
            "Inspect bearing condition; plan replacement if defect is confirmed.",
            "Continue monitoring or trending after lubrication.",
        ],
        "finding" => "Impacts up to 5.7 Gs; suspected bearing defect at about 225Hz.",
    ],
    [
        "asset" => "44",
        "priority" => "high",
        "title" => "Cone Crusher B motor structural looseness (P2)",
        "plan" => [
            "Inspect and tighten motor hold-down bolts.",
            "Repair or strengthen motor support structure.",
            "Isolate motor base-frame from crusher structure to reduce transmitted vibration.",
        ],
        "finding" => "1x vibration indicates structural looseness at motor DE.",
    ],
    [
        "asset" => "5",
        "priority" => "critical",
        "title" => "Cone Crusher B crusher bearing and lubrication fault (P1)",
        "plan" => [
            "Lubricate bearings immediately and check lubrication system for faults.",
            "Inspect bearings for damage; plan replacement if required.",
            "Verify vibration trend after lubrication.",
        ],
        "finding" => "Vibration trending 9.2 to 16.4 mm/s RMS; impacts up to 14.8 Gs; broadband noise indicates lubrication fault.",
    ],
    [
        "asset" => "31",
        "priority" => "critical",
        "title" => "Vibro Screen 1 motor looseness and belt misalignment (P1)",
        "plan" => [
            "Repair or reinforce cracked motor support frame.",
            "Inspect and torque motor hold-down bolts.",
            "Inspect or replace worn belts as required.",
            "Align belts and set correct tension.",
        ],
        "finding" => "Vibration 50.9 mm/s RMS and axial 13.3 to 21.8 mm/s; strong 1x indicates looseness and belt misalignment.",
    ],
    [
        "asset" => "38",
        "priority" => "critical",
        "title" => "Vibro Screen 2 motor looseness and loose belts (P1)",
        "plan" => [
            "Repair or reinforce cracked motor support frame.",
            "Inspect and torque motor hold-down bolts.",
            "Replace belts and ensure equal tensioning.",
            "Clean motor cooling fan and remove dust buildup.",
        ],
        "finding" => "Vibration 57.8 mm/s RMS; strong 1x indicates looseness; belts flapping suggests unequal tension.",
    ],
    [
        "asset" => "40",
        "priority" => "critical",
        "title" => "Vibro Screen 3 motor structural looseness (P1)",
        "plan" => [
            "Inspect and torque motor hold-down bolts.",
            "Repair or strengthen motor support structure.",
            "Clean motor cooling fan and remove dust buildup.",
        ],
        "finding" => "Vibration 7.6 mm/s RMS; strong 1x indicates structural looseness.",
    ],
];
$results = [];
foreach ($actions as $item) {
    $planLines = "Action Plan:\n" . implode("\n", array_map(fn($line) => "- {$line}", $item["plan"]));
    $description = "VA Report 21 Jan 2026 - Fourways Crushing Plant\nFindings: " . $item["finding"] . "\n" . $planLines;
    $args = [
        "asset" => $item["asset"],
        "title" => $item["title"],
        "description" => $description,
        "priority" => $item["priority"],
    ];
    $result = $executor->execute("workorders.create", $args, ["user" => $user, "role_names" => []], "web");
    $results[] = $result;
}
return $results;
